NEWS CENTER

Don't you know about the clinker bulk machine? You must see it!


Release time:

Feb 18,2021

The clinker bulk machine is composed of electric control box, motor, reducer, pulley telescopic pipe, dust suction pipe, wire rope and other main components. They are connected together by wire rope and dust suction pipe to form a telescopic structure. The clinker bulk machine can be interlocked with the feeding equipment under the material warehouse. After the tanker is full, the loading and unloading process is automatic, with high loading efficiency and less dust pollution. It is an ideal equipment for loading and shipping of bulk powder materials.

clinkerbulk machineIt is composed of electric control box, motor, reducer, pulley block telescopic pipe, dust suction pipe, wire rope and other main components. They are connected together by wire rope and dust suction pipe to form a telescopic structure. The clinker bulk machine can be interlocked with the feeding equipment under the material warehouse. After the tanker is full, it will automatically stop loading, realize automatic loading and unloading process, have high loading efficiency and less dust pollution, and are ideal equipment for loading and shipping of powdery materials.

clinkerbulk machineIt is installed at the bottom of the cement clinker warehouse, and a rod valve is arranged between the connections, which is used to close the clinker warehouse during the maintenance of the bulk machine. A fan-shaped valve is installed on the top of the bulk machine, and an electric push rod is used to complete the switching action. During loading, the blanking and loading pipeline is aligned with the loading space and put down. The loading pipeline is composed of four to five steel pipes. The hoisting winch is retracted to meet the stacking requirements during loading. At this time, the fan-shaped valve on the loading machine is started. The materials fall down due to their own weight and are loaded onto the transport vehicle along the telescopic steel pipe. Dust collection channels are installed on both sides of the blanking and loading pipe. The three are installed on a rectangular cover to absorb the dust while loading.

About clinkerbulk machineMaintenance:

1. The operator of the clinker bulk machine should conduct a comprehensive inspection of the equipment 5-10 minutes before starting up. Refueling and cleaning according to regulations can only be put into use after the inching test run is correct.

2, to strictly abide by the operating procedures, pay attention to the operation of the equipment at any time. If any abnormality or fault is found, stop the machine immediately for inspection and eliminate it in time. For the faults that cannot be ruled out, the maintenance personnel shall be notified for maintenance, and the maintenance personnel shall make maintenance records.