NEWS CENTER
NEWS CENTER

Company News

Industry dynamics

Policies and regulations

Instruction for Air Tank Pulse Dust Collector

The air box pulse dust collector series is based on technology. In order to expand the scope of use, more users can meet the needs of large dust throughput and high concentration. Main characteristics of air tank pulse dust collector:

15

2022

/

03

Why the air delivery chute is blocked in use

Air conveying chute is a kind of pneumatic conveying equipment widely used for conveying dry powder materials. It is often used to convey cement and raw material powder in the cement industry. Because the air conveying chute has no moving parts in the process of conveying materials, it has the advantages of low wear, convenient maintenance, low power consumption, low material consumption, no noise, good sealing, simple structure, safe and reliable operation, easy change of material flow direction, multi-point in and out of materials and other advantages. Compared with the belt conveyor, the screw conveyor and the scraper conveyor have the same power. Therefore, it has been widely adopted by many enterprises in recent years.

28

2022

/

02

Eight factors that should be paid attention to when the air conveying chute is used correctly

Air conveying chute A powder conveying device that uses a high-pressure centrifugal fan as a power source to keep the powder in the closed chute fluidized, inclined, and slowly flowing downward. It has no noise, good sealing, no pollution, and simple structure, Safe operation, easy maintenance, environmental protection and practical characteristics, can realize multi-point feeding and discharging. The following factors should be paid attention to when used correctly:

14

2022

/

02

Installation and use method of air delivery chute

The air conveying chute includes a feeding chute, an air supply chute, a fan, an ash discharge port and an ash inlet. The feeding chute and the air supply chute are high at one end and low at the other end. The air supply chute is attached to the bottom of the feeding chute. The length direction of the air supply chute and the feeding chute are the same. Air conveying chute is used to convey fly ash in coal-fired power plants, which has good economic and environmental benefits. Air conveying chute is a kind of environmental protection equipment with large conveying capacity and high working efficiency. It is mainly used for horizontal conveying operation, and the conveying distance is longer than that of sealing material pump.

29

2022

/

01

Construction principle of air conveying chute

The air conveying chute is a conveying device that uses air to make solid particles flow down the chute in a fluidized state. This mode of transportation belongs to gas-solid dense phase transportation, which is widely used in building materials, chemical industry, light industry and other departments.

14

2022

/

01

Installation and maintenance of vibration hoist

It is a very important and regular job to maintain the machinery during factory production. The installation and maintenance of the vibrating hoist should be checked by staff on duty. For example, the bearing of the hoist should be able to bear the full load of the whole machinery. Therefore, the frequent lubrication of the vibrating hoist is greatly related to the life of the bearing.

30

2021

/

12

Common Faults and Solutions of Electric Hoist

As we all know, if the head wheel and the bottom wheel drive shaft of the electric hoist are installed in the wrong way or in the wrong direction, it is very easy to cause the phenomenon of deviation of the hopper belt. Its main manifestation is that the transmission shafts of the bottom wheel and the head wheel are in the same vertical plane, but are not parallel or two transmission shafts. Although they are installed in a horizontal position, they are not in the same vertical plane. Above, or although the two transmission shafts are parallel and still on the same vertical plane, they are not horizontal.

15

2021

/

12

Relevant introduction of spiral hoist

At present, there are many kinds of hoist on the market, including spiral hoist, which is a large-scale lifting equipment that is transported by changing potential energy. The spiral hoist has a relatively strong lifting capacity and high power. It can transport crushed limestone and other massive materials, pulverized coal, cement raw materials and other powdery materials through vertical lifting, and can transport different types of materials according to different operating speeds.

01

2021

/

12

Relevant introduction of winding hoist

A winding hoist is a device that lifts and lowers a container by winding and releasing a wire rope on a drum. In the winding hoist, one end of the wire rope is fixed and wound on the hoisting drum, while the other end bypasses the container hoisted by the sheave, thus winding or releasing the wire rope with the help of the forward and reverse directions of the drum, thus making the container move up and down. Next, let's introduce the relevant knowledge of the winding hoist in detail.

15

2021

/

11

Bucket elevator feed height adjustment considerations:

Factors to be considered when adjusting the height of the feed port of the bucket elevator: adjust the height of the feed port to ensure that the material of the feed port is evenly spread in the width direction, and avoid uneven feeding and loading of the bucket elevator, resulting in uneven wear of the chain plate (or tape), hopper or sprocket, or deviation of the chain plate (or tape) of the hoist. Therefore, consider the following factors:

03

2021

/

11

< 1234...20 >

Creating a Better Future Together

To "good quality, professional service, customer satisfaction" for business purposes

Contact us →