NEWS CENTER

Solve the phenomenon of belt slippage of belt conveyor


Release time:

Jun 08,2012

Belt conveyor is a kind of friction drive to transport materials in a continuous way of machinery, not only for the transport of broken materials, can also be carried out into pieces of goods, but also with the industrial enterprises in the production process of the process requirements, the formation of a rhythmic flow transport line, widely used in a variety of modern industrial enterprises. In the process of use, the phenomenon of belt slippage sometimes occurs. The solution is as follows: the belt conveyor using the heavy hammer tensioning device can add a counterweight to solve the problem when the belt slips, until the belt does not slip. But should not add too much, so as not to make the belt bear unnecessary excessive tension

Belt conveyor is a kind of friction drive to transport materials in a continuous way of machinery, not only for the transport of broken materials, can also be carried out into pieces of goods, but also with the industrial enterprises in the production process of the process requirements, the formation of a rhythmic flow transport line, widely used in a variety of modern industrial enterprises.

The belt sometimes slips during use. The solution is as follows:

The belt conveyor using the heavy hammer tensioning device can add a counterweight to solve the problem when the belt slips, until the belt does not slip. But should not add too much, so as not to make the belt bear unnecessary excessive tension and reduce the service life of the belt; the use of spiral tension or hydraulic tension belt conveyor slippage can adjust the tension stroke to increase the tension. However, sometimes the tensioning stroke is not enough and the belt is permanently deformed. At this time, the belt can be cut off for re-vulcanization. When using nylon belt or EP, the tensioning stroke is required to be longer. When the stroke is not enough, it can also be re-vulcanized or increased. Tension stroke to solve.