NEWS CENTER

Many industries require the use of pulse stand-alone dust collectors


Release time:

Jun 28,2021

Many industries need to use pulse single machine dust collector, which can effectively reduce dust and ensure that daily engineering processing is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, we will also pay attention to choosing the right product. Only in this way can we ensure our subsequent processing and use, and the processing effect of this kind of equipment is definitely related to our daily operation. The following describes the use of the corresponding precautions.

Many industries need to usePulse single-machine dust collectorIt can effectively reduce dust and ensure that daily engineering processing is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, we will also pay attention to choosing the right product. Only in this way can we ensure our subsequent processing and use, and the processing effect of this kind of equipment is definitely related to our daily operation. The following describes the use of the corresponding precautions.

The electric control box cover shall not be opened at will when the pulse stand-alone dust collector is working. If the cleaning time needs to be adjusted or the circuit needs to be checked, the power supply shall be cut off after shutdown.

During the normal operation of the equipment, the electric control box cover of the independent dust collector cannot be opened, which will affect the normal operation of the equipment and may cause many hidden operation hazards. Therefore, it is recommended that during the normal operation of the equipment, do not open it, do a good job of cleaning the dust, or we need to check the internal wiring, and then need to stop the machine to continue the internal disassembly to ensure good use effect.

  Pulse single-machine dust collectorAccording to the nature and volume of the dust, remove the dust regularly. Dust removal is performed by the program controller, starting the pulse valves in a regular sequence. The compressed air in the bag is ejected from the nozzle through the venturi tube, and the surrounding air is introduced into the filter bag several times of the primary air, so that the filter bag expands rapidly in an instant, and the dust is shattered and closed. The reverse effect of the airflow to remove the dust.

Pulse single dust collector according to the actual needs, regular dust removal. When removing dust in the dust collector, it is only necessary to open the sealed dust removal port when the fan and dust removal mechanism stop working, and put the dust collector, drawer or directly on the conveyor belt.

In order to ensure that the dust removal equipment is in good working condition, it should be as close as possible to the dust source, 1.5 meters to 2.0 meters, the connecting pipe should be as short as possible, and the elbow should be as few as possible to avoid increasing resistance.

The dust hood is a key accessory to ensure the normal operation of the stand-alone dust removal unit. Users should be processed according to the dimensions of the dust, according to the open, close, smooth, sealed principle, design vacuum cover, make the ideal dust cover.

Before the pulse single dust collector works, check whether the door, ash door, and pipeline connection system are sealed to avoid air leakage and reduce the dust removal effect.

  Pulse single-machine dust collectorThe manufacturer recommends regular cleaning.

Due to the different performance and capacity of the single dust collector, it is necessary to clean the dust regularly, but the use of each device is different, so it is also important to make many aspects of confirmation and regular internal inspection. Although it is a dust removal equipment, if there is a lot of dust in it, it will inevitably affect the use of our subsequent equipment, so pay special attention to regular dust removal.