NEWS CENTER

Maintenance and Operation Effect of Single Pulse Dust Collector


Release time:

May 14,2021

Before running every day, we must check the reliability of the clutch and brake device. And in the process of operation, should also be at any time to check whether the noise of the motor, reducer is normal, to see whether the temperature is too high phenomenon.

  Pulse single-machine dust collectorEvery day before running, we must check the reliability of the clutch and brake device. And in the process of operation, should also be at any time to check whether the noise of the motor, reducer is normal, to see whether the temperature is too high phenomenon.

As a kind of dust removal equipment, pulse single machine dust collector is widely used in construction, machinery, metallurgy, mining and other fields. In order to make it work with higher efficiency, we should learn to use it correctly and maintain it well. Then the following is to explain the use and maintenance of pulse single machine dust collector.

First of all, wear safety protective gloves before operation and maintenance, cut off the power before operating the equipment, and check whether the stability of all removable parts is good before use. In addition, all filter elements should be securely fixed on the flower plate, and it is also necessary to check whether the detection window is closed. After use, the equipment should be tested every six months and necessary maintenance should be carried out. Perhaps many friends do not know that the pulse stand-alone dust collector is not bought and used directly, but also needs some installation. How to install the pulse type main control device is the core part of the single pulse dust collector, and the quality of the manufacturer's products is mainly reflected in this part.

  Pulse single-machine dust collectorAfter the installation process is summarized, there are mainly the following contents:

1. Pay attention to the damage of the box body and accessories when installing the single-machine dust collector for lifting. The aperture of the tank top needs to be smaller than that of the dust collector.

2. The top of the tank shall be welded to the top of the ash storage tank, and then the induced draft fan shall be connected.

3. Then turn on the air compressor, and a soft connection is also required, which is the way to connect to the air tank of the dust collector.

  4、Pulse single-machine dust collectorBefore installation, it is necessary to check to ensure that all parts are in good condition. If any damage or deformation is found, repair it in time to ensure that it is correct before installation.

The installation of the filter cartridge in the single-machine pulse dust collector needs to be vertically fixed in it, and the installation should be compact.

Only the correct installation and use of single pulse dust collector, can we work in a dust-free environment, so that our surrounding environment has become more green.