NEWS CENTER

Precautions for Operation of Pulse Single Dust Collector


Release time:

Sep 17,2021

In many industries, pulse stand-alone dust collectors are required. This kind of dust removal equipment can effectively reduce dust and ensure that daily engineering treatment is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, choose the appropriate brand products to ensure our subsequent processing and use. However, the processing effect of this type of equipment is definitely related to our daily operations. Below we introduce the corresponding precautions.

In many industries, pulse stand-alone dust collectors are required. This kind of dust removal equipment can effectively reduce dust and ensure that daily engineering treatment is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, choose the appropriate brand products to ensure our subsequent processing and use. However, the processing effect of this type of equipment is definitely related to our daily operations. Below we introduce the corresponding precautions.

1. When working, the box cover of the electric control cabinet of the pulse stand-alone dust collector shall not be opened at will. If you need to adjust the dust removal time or check the circuit, you should turn off the machine and cut off the power to work.

The cover of the electrical cabinet of the pulse stand-alone dust collector cannot be opened during the normal operation of the equipment, which will affect the normal operation of the equipment and may also cause many hidden operational hazards. Therefore, it is recommended that you do not open the equipment during normal operation, do a good job of dust removal, or we need to check the internal wiring, so we need to stop the machine before continuing the internal disassembly, so as to ensure a good use effect.

2. The pulse single-machine dust collector should regularly remove dust according to the nature of the dust and the size of the capacity. The dust removal is started by the pulse valve in a timed sequence by the program controller. The compressed air in the bag is ejected from the air blowing hole and introduced into the filter bag through the venturi tube, so that the filter bag expands rapidly in an instant, and the dust is shaken off with the reverse effect of the airflow, so as to achieve the purpose of dust removal.

3. Pulse single dust collector according to the actual needs, regular cleaning dust. When cleaning the dust in the vacuum cleaner, just open the sealed dust door when the fan and dust removal mechanism stop working, and the dust will fall on the ash hopper, drawer or directly on the conveyor belt.

In order to ensure that the dust removal equipment is in good working condition, it should be as close as possible to the source of dust, generally 1.5 meters to 2.0 meters is preferred. The connecting pipe should be as short as possible, and the elbow should be smaller to avoid increasing resistance.

5. The dust cover is a key accessory to ensure the normal operation of the pulse stand-alone dust collector unit. The user should use it according to the appearance size of the workpiece and the nature of the dust. According to the opening, closing, sealing and design principles of the dust cover, an ideal dust cover is made.

6. Before work, the pulse single-machine dust collector should check whether the inspection door, ash exit door, and air duct connection system are sealed to avoid leakage and reduce the dust collection effect.