NEWS CENTER

Precautions for Operation of Pulse Single Dust Collector


Release time:

Jun 03,2021

Many industries need pulse single machine dust collector, such dust removal equipment can effectively reduce dust, to ensure that the daily engineering processing is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, we will also pay attention to choosing appropriate brand products to ensure our subsequent processing and use, and the processing effect of this type of equipment is definitely related to our daily operations. Here to introduce the corresponding use of attention.

Many industries needPulse single-machine dust collectorSuch dust removal equipment can effectively reduce dust and ensure that daily engineering processing is not affected. Although we will pay special attention to the quality of the corresponding equipment when purchasing equipment, we will also pay attention to choosing appropriate brand products to ensure our subsequent processing and use, and the processing effect of this type of equipment is definitely related to our daily operations. Here to introduce the corresponding use of attention.

1. The electric control box cover shall not be opened at will when the pulse stand-alone dust collector is working. If the cleaning time needs to be adjusted or the circuit needs to be checked, the power supply should be cut off.

The cover of the electric control box cannot be opened during normal operation of the pulse stand-alone dust collector equipment. This will affect the normal operation of the equipment and may cause many hidden dangers in operation, so it is recommended that you do not open it when operating the equipment normally. Must do a good job of dust removal, or need to check the internal wiring, so you must stop the machine before continuing the internal disassembly, so as to ensure good use effect.

  2、Pulse single-machine dust collectorAccording to the nature of the dust and the size of the volume, regular cleaning, cleaning is to start the pulse valve program controller in a certain order. The compressed air in the bag is ejected from the blowing hole through the Venturi tube, inducing the surrounding air to enter the filter bag several times as much as the primary air, making the filter bag expand rapidly in an instant, and shaking off the dust accompanied by the reverse effect of the air flow, so as to achieve the purpose of cleaning dust.

3, pulse single dust collector according to the actual needs, regular cleaning dust, cleaning dust inside the dust collector, only in the fan and dust removal mechanism to stop working when open the sealed dust outlet, the dust will fall into the ash hopper, drawer or directly to the conveyor belt.

4. In order to ensure that the dust removal equipment is in good working condition, it should be as close to the dust source as possible, generally 1.5 meters to 2.0 meters is better, the connecting pipe should be as short as possible, and the elbow should be minimized to avoid increasing resistance.

5. The dust cover is a key accessory to ensure the normal operation of the pulse stand-alone dust collector device. The user should design an ideal vacuum cover according to the size of the processed parts and the nature of the dust, and according to the principle of opening, closing, closing and sealing of the vacuum cover.

  6、Pulse single-machine dust collectorBefore work, check whether the connection system of the access door, ash exhaust door and air duct is sealed to avoid air leakage and reduce the dust collection effect.

7, pay attention to regular cleaning work.